Pulse counters for DIN rail mounting, for AC or DC, overall height 60 mm or 64 mm

Electromechanical pulse counters register quantities and therefore document production results or operating cycles. These are units for DIN-rail mounting with overall height of 60 or 64 mm.

Electromechanical pulse counters AC/DC

Electromechanical pulse counters AC: 663.6, 663.7

Housing:

Plastic light grey RAL 7035

Gearing:

Plastic

Counting range:

9999999

Max. frequency:

10 pulses/sec. max. duty cycle 100 %

Digits:

1,8 x 3,6 mm, white on black, decimals black on white

Voltages:

115 or 230 V AC

Special voltages: (additional charge)

24, 48, 400 V AC

Voltage tolerance:

±10 %

Frequency:

50 or 60 Hz (on request 20 to100 Hz)

Power consump.:

< 2 VA

Protection (front):

IP 65, screws IP 20

Ambient temp.:

–10 ° C to +70° C

Stocking temp.:

–40 ° C to +80° C

Elec. connection:

Terminal Blocks (lift principle) with Philips-Head-Screw (+/- screw) in combination with slotted screw with 3 mm screwdriver size, 0 – 2.5 mm2 fine wire or 0 – 4 mm2 single wire

Max. torque:

0,5 Nm

Vibration resist.:

1 g (10...500 Hz) acc. to EN 60068-2-34

Shock resistance:

30 g (18 ms) acc. to EN 60068-2-27 25 g (6 ms) acc. to EN 60068-2-29

EMC:

EN 55011, EN 61000-6-2

Industrial norm:

EN 61010, protection class II

Reset:

Without

Weight:

Approx. 75 g

Approval:

CE, UL, cUL C, UL, cUL

Fixing:

Snap-on fixing for DIN-rail according to DIN EN 50022

Overall height in mm:

60

'Lift' terminal connection:

Yes

Electromechanical pulse counters DC: 668.6, 668.7

Housing:

Plastic light grey RAL 7035

Gearing:

Plastic

Counting range:

9999999

Max. frequency:

10 pulses/sec. max. duty cycle 100 %

Digits:

1,8 x 3,6 mm, white on black, decimals black on white

Voltages:

12 – 24 V DC

Special voltages: (additional charge)

On request

Voltage tolerance:

±10 %

Frequency:

Power consump.:

< 1 VA

Protection (front):

IP 65, screws IP 20

Ambient temp.:

–10 ° C to +70° C

Stocking temp.:

–40 ° C to +80° C

Elec. connection:

Terminal Blocks (lift principle) with Philips-Head-Screw (+/- screw) in combination with slotted screw with 3 mm screwdriver size, 0 – 2.5 mm2 fine wire or 0 – 4 mm2 single wire

Max. torque:

0,5 Nm

Vibration resist.:

1 g (10...500 Hz) acc. to EN 60068-2-34

Shock resistance:

30 g (18 ms) acc. to EN 60068-2-27 25 g (6 ms) acc. to EN 60068-2-29

EMC:

EN 55011, EN 61000-6-2

Industrial norm:

EN 61010, protection class II

Reset:

Without

Weight:

Approx. 75 g

Approval:

CE, UL, cUL C, UL, cUL

Fixing:

Snap-on fixing for DIN-rail according to DIN EN 50022

Overall height in mm:

64

'Lift' terminal connection:

Yes