Hour counters for DIN rail mounting, for AC or DC, overall height 60 mm or 64 mm

With its overall height of 60 or 64 mm it is an ideal counter program for DIN rail mounting. A part of these AC or DC counters are produced with two decimals and special terminals (liftprinciple) values in just one single housing.

Electromechanical hour counters AC/DC

Electromechanical hour counters AC: 661.6, 661.7

Housing:

Plastic light grey RAL 7035

Gearing:

Plastic

Counting range:

99999,99

Digits:

1,8 x 3,6 mm, white on black, decimals black on white

Voltages:

115 or 230 V AC

Special voltages: (additional charge)

24, 48, 400 V AC

Voltage tolerance:

±10 %

Frequency:

50 or 60 Hz (on request 20 to100 Hz)

Power consump.:

< 2 VA

Protection (front):

IP 65, screws IP 20

Ambient temp.:

–10 ° C to +70° C

Stocking temp.:

–40 ° C to +80° C

Elec. connection:

Terminal Blocks (lift principle) with Philips-Head-Screw (+/– screw) in combination with slotted screw with 3 mm screwdriver size, 0 – 2.5 mm² fine wire or 0–4 mm² single wire clamp 2 and 3 (1 and 4 n. c.)

Max. torque:

0,5 Nm

Vibration resist.:

1 g (10...500 Hz) acc. to EN 60068-2-34

Shock resistance:

30 g (18 ms) acc. to EN 60068-2-27 25 g (6 ms) acc. to EN 60068-2-29

EMC:

EN 55011, EN 61000-6-2

Industrial norm:

EN 61010, protection class II

Reset:

Without

Weight:

Approx. 75 g

Approval:

CE, UL, cUL C, UL, cUL

Fixing:

Snap-on fixing for DIN-rail according to DIN EN 50022

Electromechanical hour counters DC: 666.6, 666.7

Housing:

Plastic light grey RAL 7035

Gearing:

Plastic

Counting range:

99999,99

Digits:

1,8 x 3,6 mm, white on black, decimals black on white

Voltages:

12 – 24 V DC

Special voltages: (additional charge)

On request

Voltage tolerance:

±10 %

Frequency:

Power consump.:

< 1 VA

Protection (front):

IP 65, screws IP 20

Ambient temp.:

–10 ° C to +70° C

Stocking temp.:

–40 ° C to +80° C

Elec. connection:

Terminal Blocks (lift principle) with Philips-Head-Screw (+/– screw) in combination with slotted screw with 3 mm screwdriver size, 0-2.5 mm² fine wire or 0–4 mm² single wire clamp 2 and 3 (1 and 4 n. c.)

Max. torque:

0,5 Nm

Vibration resist.:

1 g (10...500 Hz) acc. to EN 60068-2-34

Shock resistance:

30 g (18 ms) acc. to EN 60068-2-27 25 g (6 ms) acc. to EN 60068-2-29

EMC:

EN 55011, EN 61000-6-2

Industrial norm:

EN 61010, protection class II

Reset:

Without

Weight:

Approx. 75 g

Approval:

CE, UL, cUL C, UL, cUL

Fixing:

Snap-on fixing for DIN-rail according to DIN EN 50022